Mazda 323

since 1985 release

Repair and operation of the car


Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
- Governing bodies and methods of operation
   Before landing in the car
   Running in
   Keys
   Locks of doors
   The uniform (central) locking device (if is available)
   Protection against pranks of children (if is available, only on back doors)
   The power window (if is available)
   Back rotary glasses (on 3-door models)
   Seats
   Adjustment of height of a steering wheel (if is available)
   Seat belts (if is available)
   Door back/trunk lid
   Fuelling
   Mirrors
   Luggage belts
   Trunk lid (if is available)
   Spare wheel
   Dashboard
   + Steering wheel and gear shifting
+ Electric circuits

25215d41 Ателье для белорусских дизайнеров одежды.

Spare wheel

 

 The spare wheel depending on need can be placed or in standing or lying position.

Spare wheel upright:

  1. Cast away a cover of a spare wheel to a back of a back seat.
  2. Establish a wheel and fix it by belts.

Check that the back of a back seat was correctly fixed, at placement of a spare wheel upright that in case of emergency brake application or accident there was no additional danger.

Hatchback

The spare wheel, jack, the handle of a jack and tools are placed in a luggage compartment.

That the jack, the handle of a jack and tools did not knock at the movement, they have to be correctly fixed.

Toolbox

The toolbox is on the right side of a luggage compartment.

Versatile person

The jack, the handle of a jack and tools are placed in a luggage carrier.

Taking out of a jack

That the jack, the handle of a jack and tools did not knock at the movement, they have to be correctly fixed.


The jack is in a box on the right side. Open a cover and weaken tightening a bolt to take out a jack.

Taking out of a spare wheel from fastening

 PERFORMANCE ORDER

  1. Open a back door.
  1. Remove a fastening bolt cap. Squeeze cap brackets in the direction of an arrow, and extend a cap.

Turn a bolt a key for wheel nuts on 30 – 35 turns to the left.

Press fastening of a spare wheel up and delay brackets back to unhook fastening. Strongly hold fastening of a spare wheel, pressing a clamp forward.

If to release fastening of a spare wheel, the wheel can jump out.

Fixing of a spare wheel in fastening

 PERFORMANCE ORDER

  1. Correctly enclose a spare wheel in the center of fastening.

If the spare wheel is incorrectly established in fastening, fastening will be incorrectly recorded. Even if fastening can be established, there is a danger that the wheel will fall at the movement.


  1. Fix a spare wheel in the sequence, the return to removal.