Mazda 323
+ Introduction + Petrol engines + Engine lubrication system + Engine cooling system + System of ignition - Power supply system, carburetor, system of injection of fuel Rules of purity during the work with a power supply system Removal and installation/check of the sensor in the fuel tank Removal and installation of the fuel tank Removal and installation of the fuel pump Removal and installation/check of the fuel pump Removal and installation of the air filter + Carburetor + System of injection of fuel + Diesel engine + System of production of the fulfilled gases + Coupling + Manual transmission + Automatic transmission + Suspension bracket and system of steering + Brake system + Wheels and tires, body, coloring of the car, care of the car + System of electric equipment + Heater, system of lighting, devices + Governing bodies and methods of operation + Electric circuits
|
Removal and installation of the air filter Carburetor engine
Removal
|
|
- To weaken brackets of fastening and to unscrew a lambskin nut. To uncover the air filter.
|
- To take out the filtering element.
- To disconnect a preheating hose from the case of the air filter.
- To disconnect vacuum hoses and a hose of ventilation of a case. For simplification of installation to mark hoses with an adhesive tape.
- To unscrew bolts of fastening of the lower part of the air filter. To remove the lower part of the filter.
- To close the carburetor a pure rag.
| Not to allow falling of details in the carburetor as it can cause serious damages of the engine. |
|
|
Installation
|
- To remove a rag.
- To check a preheating hose for existence of damages, if necessary to replace.
- To put on a preheating hose the case of the air filter. To watch that the union correctly entered a hose of preheating and was not compressed or damaged.
- To connect to the air filter vacuum hoses and a hose of ventilation of a case according to marking.
- To establish and screw the lower part of the air filter.
- To insert the filtering element.
- To establish a cover of the air filter, to screw a lambskin nut and to fix by fastening brackets.
|
|
Injector engine
Removal
|
- To disconnect the plug from the measuring instrument of mass of air.
|
- If is available, to disconnect a cable of high voltage-1-and connections on the ignition coil. For simplification of installation to mark cables with an adhesive tape.
|
- To weaken hose collars and to disconnect a hose-2-soaked up air.
- To turn out bolts of fastening of the-3-top part of the air filter.
|
- To turn out bolts of fastening-4-and to take out the lower part of the air filter.
|
|
|
Installation
|
- To establish the lower part of the air filter and to tighten bolts.
- To enclose the filtering element.
- To establish the top part of the air filter and to tighten fastening bolts.
- To put on a hose of the soaked-up air on the top part of the air filter and to fix by a collar.
- To connect a cable of high voltage and connection of the coil of ignition according to marking.
- To connect the plug of a potentiometer of a butterfly valve.
|
|
Diesel engine
Removal
|
- To weaken hose collars and to disconnect a hose of the soaked-up air.
|
- To weaken bolts of fastening-5-and to remove the top part of the air filter-1-.
|
- To take out the filtering element-2-.
- To disconnect a hose of ventilation of a case-6-, previously having weakened a collar.
- To unscrew bolts of fastening-4-and to remove the lower part of the air filter-3-.
|
|
Installation
|
- To establish the lower part of the air filter and to tighten fastening bolts with effort of 25 Nanometers.
- To connect a hose of ventilation of a case to the case of the air filter and to fix by a collar.
- To insert the filtering element.
- To establish the top part of the air filter and to screw fastening bolts.
- To connect a hose of the soaked-up air and to fix by a collar.
|
|
|
|