Mazda 323

since 1985 release

Repair and operation of the car

Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
- Engine cooling system
   Contour of cooling liquid
   Antifrizny concentrate
   Replacement of cooling liquid
   Check of tightness of the cooling system
   Removal and installation/check of the thermostat
   Removal and installation of the water pump
   Removal and installation of a radiator
   Removal and installation of the motor of the fan
   Check of a thermoswitch
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits


Antifrizny concentrate

At the plant the cooling system is filled with mix of water and an antifrizny anticorrosive concentrate. The concentrate prevents damages of system because of freezing and corrosion and besides lifts a liquid boiling point. Therefore the cooling system has to be all the year round filled with antifrizny and anticorrosive cooling liquid.

It is necessary to apply only company liquid on an etilenglikolevy basis with anticorrosive properties. The concentrate has to be compatible to aluminum details. It is impossible to use the cooling concentrate on a spirit basis.

As eventually an anticorrosive part of cooling liquid loses the influence, cooling liquid has to be replaced within maintenance, see the Section Technology of Service, tools and the equipment of a workplace. Also cooling liquid has to be replaced when replacing aluminum details, for example, of a head of cylinders.

For achievement of a proper correlation of a concentrate and water it is necessary to consider data of the producer. At the latitude of Germany frost resistance has to be to -20 °C.

The concentrate has to mix up with the demineralizirovanny or distilled water.

  Ratios of a concentrate and water in liters

designations of engines frost resistance quantity
to -26 °C to -40 °C
concentrate water concentrate water
E1, EZ, E5 2,25 2,75 2,75 2,25 5,0
VZ, VZE, B5, B6, BP mechanical transmission 2,25 2,75 2,75 2,25 5,0
VZ, VZE, B5, B6, BP automatic transmission 2,7 3,3 3,3 2,7 6,0
PN 2,7 3,3 3,3 2,7 6,0

On the homepage