Mazda 323

since 1985 release

Repair and operation of the car


Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
- Engine cooling system
   Contour of cooling liquid
   Antifrizny concentrate
   Replacement of cooling liquid
   Check of tightness of the cooling system
   Removal and installation/check of the thermostat
   Removal and installation of the water pump
   Removal and installation of a radiator
   Removal and installation of the motor of the fan
   Check of a thermoswitch
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits

25215d41 Ателье для белорусских дизайнеров одежды.

Removal and installation of the motor of the fan

Removal

 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

At the same time data from memory of malfunctions of the engine or a protective code of the radio receiver are erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal also installation of the battery.

  1. To switch-off the fan plug.
  2. To unscrew bolts of fastening of the holder of the fan on a radiator.
  3. To incline the fan motor with the holder back and to take out up.
  4. Holding a krylchatka, to unscrew the central bolt of the fan on the motor.
  5. To unscrew bolts of fastening and to remove the motor from the holder.

Installation

 PERFORMANCE ORDER

  1. To screw the fan motor on the holder.
  2. To screw a krylchatka on the motor.

fan motor

  1. To screw the motor with the holder on a radiator with effort of 10 Nanometers.
  1. To connect the plug.
  2. To connect a cable of mass of the battery.
  3. If are available, to determine time on hours and to set a protective code of the radio receiver.
  4. To check work. For this purpose to warm up the engine that the fan turned on.