Mazda 323

since 1985 release

Repair and operation of the car

Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of the drive of coupling
      Check/adjustment of a pedal of coupling
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits


Visual check of tightness


  1. The following places of leak are possible:
  2. Junction of the block of cylinders and transmission (laying transmission flywheel/epiploon).
  3. Junction of half of a case of the transmission.
  4. Oil-filling bolt / маслосливной bolt.
  5. Power shaft on the transmission.
  6. By search of places of leak to work as follows.
  7. To clear a transmission case a cold cleaner.
  8. To check oil level, if necessary to add.
  9. To powder possible places of leak with talc or lime.
  10. To make a trial trip. That oil was more liquid, a trial trip it is necessary to make 30 km on distance.
  11. Then to lift the car and to check a transfer box for places of leak by means of a lamp.
  12. To eliminate places of leak.

On the homepage