Box of differential and transfer case: Check of level of oil On cars with the four-wheel drive it is necessary to check oil level in a box of differential and in the transfer case. The following spare details are necessary:
- Laying of a maslozalivny stopper.
- Gearbox oil according to the specification: temperatures are above -18 °C: API GL - 5 SAE 90; temperatures are below -18 °C: API GL - 5 SAE 80.
Check
Transfer case
|
|
- To lift the car in horizontal position.
- If is available, to remove a guard of the engine and transmission.
- To make visual check of tightness of the transfer case.
- To turn out maslozalivny a bolt - In-.
- To implant a finger into an opening and to check oil level. Level of oil has to be at height of a jellied opening. If necessary to add oil through an opening.
- To establish maslozalivny a bolt with new laying and to tighten 55 Nanometers with effort.
- If is available, to establish a guard of the engine and transmission.
- To lower the car.
|
|
Back differential
|
|
- To lift the car in horizontal position.
- To check tightness of the back bridge.
|
|
- To turn out a maslozalivny stopper - In-.
|
- To implant a finger into an opening and to check oil level. Level of oil has to be at height of a jellied opening. If necessary to add oil through an opening.
- To establish maslozalivny a bolt with new laying and to tighten 55 Nanometers with effort.
- To lower the car.
|
|
|
