Adjustment of drives of a heater From 10/89 g of the issue.
Cable of the gate of the fresh / circulating air
|
|
|
|
- To install the lever of the fresh / circulating air on fresh air.
|
- To attach a cable to draft of the gate of the fresh / circulating air.
- To install the gate in the provision of fresh air.
- To fix a cable cover on the case by a flat bracket.
|
|
Hummock drive of the airdistributing gate
|
|
|
|
- To install the air distribution lever against the stop to the right (defrosting).
|
- Присоедининть a cable to draft of the airdistributing gate.
- To install the gate in the provision of defrosting.
- To fix a cover of a cable and a bracket on the case.
|
|
Hummock drive of adjustment of temperature
|
|
- To install the mixing lever (the lever of adjustment of temperature) completely to the left on "cold".
- To attach a cable to draft of the mixing gate.
- To install the gate in situation "cold".
|
|
- To fix a cable cover in a bracket on the case.
|
|
|
With 9/85 on 9/89 g of the issue.
Cable of the gate of the fresh / circulating air
|
|
|
|
- To install the lever of the fresh / circulating air on fresh air.
|
- To attach a cable to draft of the gate of the fresh / circulating air.
- To install the gate in the provision of fresh air, for this purpose to shift the driving lever against the stop forward.
- To fix a cable cover on the case by a flat bracket.
|
|
Hummock drive of the airdistributing gate
|
|
- To install the lever of the airdistributing gate against the stop to the right (defrosting).
|
|
- To delay the lever against the stop down and to attach a cable loop on the lever.
|
|
|
- To delay a connecting bar against the stop down, then to establish a connecting bar on fastening.
|
- To clamp a bar a collar.
- To turn on the fan and to leave to work at the 4th step. To switch the switch button to control panels to all provisions and to check air distribution.
|
|
Hummock drive of adjustment of temperature
|
|
- To install the mixing lever (the lever of adjustment of temperature) completely to the left on "cold".
|
|
- To delay the lever down to an emphasis and to attach a wire loop of the mixing gate to the lever.
|
|
|
- To delay the lever of a connecting bar against the stop up and to establish a connecting bar on fastening.
|
- To clamp a bar a collar.
|
|
|
