Mazda 323
+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
- Power supply system, carburetor, system of injection of fuel
Rules of purity during the work with a power supply system
Removal and installation/check of the sensor in the fuel tank
Removal and installation of the fuel tank
Removal and installation of the fuel pump
Removal and installation/check of the fuel pump
Removal and installation of the air filter
- Carburetor
Adjustment of the carburetor
Malfunctions in a fuel supply system
The carburetor with the falling stream and consecutive turning on of cameras
Check and adjustment of contents WITH
Check/removal and installation of the valve of interruption in supply of fuel
Check/removal and installation of automatic equipment of cold start
Removal and installation of the carburetor
+ System of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits
|
Check/removal and installation of the valve of interruption in supply of fuel If the engine continue to work after switching off of ignition, it is necessary to check the fuel interruption in supply valve.
Check
|
|
- To leave the engine to idle.
|
|
- To switch-off the combined plug of the valve of interruption in supply of fuel and the electromagnetic ventilating valve.
|
- If the engine stops, the valve of interruption in supply of fuel is serviceable if the engine continues to work, the valve should be replaced.
|
|
Removal
|
|
- To remove the air filter.
- To switch-off the combined plug of the valve of interruption in supply of fuel and the electromagnetic ventilating valve.
|
|
- To unscrew the fuel interruption in supply valve - the shooter-.
|
- To take out the plug of the locking valve from the case of the combined plug.
|
|
Installation
|
|
- To install the valve of interruption in supply of fuel with new laying and to screw in it.
- To insert the plug into the case of the combined plug.
- To connect the combined plug.
- To install the air filter.
|
|
|
|
