Mazda 323
+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
- Diesel engine
Principle of operation of the diesel engine
Removal and installation of a gear belt / adjustment of the drive of the distributive mechanism
System of preheat of the diesel engine
Check of system of preheat
Removal of air from a power supply system
Check/replacement of the electromagnetic valve of interruption in supply of fuel
Adjustment of the drive of gas
Check/adjustment of speed of idling
Removal and installation of nozzles
Removal and installation of the vacuum pump
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits
|
Adjustment of the drive of gas
|
|
- Before adjustment of the drive of gas it is necessary to check idling speed.
- The engine has to be heated-up up to the normal working temperature.
| Gas cable very fragile and at installation it is necessary to treat it especially carefully. Even the insignificant bend can lead to break of a cable in use. Cables which were bent should not be established. |
|
|
- To ask the assistant to squeeze out completely the accelerator pedal (the provision of full gas), or to record in this situation, having established wooden whetstone between a seat and a pedal.
|
- In the provision of full gas to adjust a cable on a countersupport by means of a lock-nut so that the TNVD lever adjoined without tension to the maximum emphasis.
- To release the accelerator pedal, the TNVD lever has to adjoin to an idling emphasis now.
|
|
|
|
