Mazda 323
+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
- Diesel engine
Principle of operation of the diesel engine
Removal and installation of a gear belt / adjustment of the drive of the distributive mechanism
System of preheat of the diesel engine
Check of system of preheat
Removal of air from a power supply system
Check/replacement of the electromagnetic valve of interruption in supply of fuel
Adjustment of the drive of gas
Check/adjustment of speed of idling
Removal and installation of nozzles
Removal and installation of the vacuum pump
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits
|
Check/adjustment of speed of idling As diesel engines have no system of ignition, the special tachometer working at a basis of photo cells is necessary. It costs quite much, it is optional to buy it.
|
|
- To warm up the engine up to the working temperature, temperature of engine oil of at least +80 °C.
- Consumers of the electric power (the radio receiver, lighting) have to be switched off.
- To leave the engine to idle, having tightened the emergency brake.
- To check the idling speed, the required value: 800-830 rpm.
|
|
- If idling is adjusted incorrectly, it is necessary to weaken a lock nut and to make adjustment by rotation of the adjusting screw. After adjustment to fix the screw again.
|
|
|
If speed does not conform to requirements, it is necessary to address in the workshop MAZDA or service BOSCH. |
|
|
|
On the homepage
|
