Mazda 323

since 1985 release

Repair and operation of the car


Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of an oil filter
      Replacement of a perepuskny oil filter
      Visual check on oil leak
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of the cooling system
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
      Check of a maple belt / tension / replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits

25215d41 Ателье для белорусских дизайнеров одежды.

Replacement of an element of the air filter

The special tool is not required. The following spare details have to be bought:

  • Element of the air filter. Upon purchase of the filtering element it is necessary to pay attention that the element according to model of the car and engine capacity is required.

The element of the air filter should not be blown by compressed air.

Carburetor engine

Removal

 PERFORMANCE ORDER

  1. To unscrew a lambskin nut and to weaken brackets. To uncover and take out the filtering element.

Installation

 PERFORMANCE ORDER

  1. To enclose the filtering element. To put on a cover, to latch brackets and to screw a lambskin nut.

Injector engine

Removal

 PERFORMANCE ORDER

  1. To weaken a hose collar and to disconnect an inlet air hose.
  1. To unscrew bolts of fastening of the top part of the air filter.
  1. To remove the top part of the air filter.
  1. To take out the filtering element.
  2. To wipe the filter case a rag.

Installation

 PERFORMANCE ORDER

  1. To enclose a new element in the case of the air filter.
  2. To establish and screw the top part.
  3. To connect an inlet hose and to fix it by a collar.

Diesel engine

Removal

 PERFORMANCE ORDER

  1. To weaken a collar and to disconnect an inlet air hose.
  1. To unscrew bolts of fastening of a cover of the air filter.
  2. To wipe the filter case a rag.

Installation

 PERFORMANCE ORDER

  1. To enclose a new element in the case of the air filter.
  2. To establish and screw a cover.
  3. To connect an inlet hose and to fix it by a collar.