Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of an oil filter
      Replacement of a perepuskny oil filter
      Visual check on oil leak
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of the cooling system
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
      Check of a maple belt / tension / replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits


25215d41

Check of level of cooling liquid

Level of cooling liquid has to be checked at regular intervals — approximately each 4 weeks, and also before each large trip. For a dolivka, even in warm season to use only mix of an antifrizny concentrate and pure bezizvestkovy water.

For continuation of a trip, especially in the summer, it is possible to add clear water. However concentration of antifreeze has to be normalized at the first opportunity.


Level of cooling liquid on the cold engine (temperature of cooling liquid of +20 °C) has to be between the marks FULL and LOW (F and L).

 PERFORMANCE ORDER

  1. To add cooling liquid before on the cold engine its level reaches the point LOW.
  2. To add cold cooling liquid only on the cold engine to avoid damages of the engine.

To open a cover only on a broad tank, never to open a radiator cover on the hot engine. When opening to put a rag on a radiator cover.

  1. To make visual check of tightness if the level of cooling liquid falls for a short time.

Type amount of liquid
with the mechanical transmission 5, 0 l
with the automatic transmission 6, 0 l


On the homepage