Mazda 323

since 1985 release

Repair and operation of the car

Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of an oil filter
      Replacement of a perepuskny oil filter
      Visual check on oil leak
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of the cooling system
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
      Check of a maple belt / tension / replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits


Frost resistance check

The following tool is necessary:

  • The test probe which is available on sale and made available on gas stations.


  1. Regularly before a winter season it is necessary to check concentration of antifrizny means, especially if before clear water was added.
  2. To warm up the engine until the top hose of cooling liquid to a radiator heats up to hand temperature.
  1. It is careful to open a cover of a compensation tank.
  1. To gather cooling liquid in the measuring probe and to take readings of a float of the probe. At the latitude of Germany frost resistance has to be to -26 °C, in areas with very frigid climate to -40 °C.

Dolivka of an antifrizny concentrate

To use only company means on an etilenglikolevy basis with anticorrosive qualities. The Antifrizny concentrate has to be suitable for aluminum details of the cooling system. It is impossible to use an antifrizny concentrate on a spirit basis.

The measured value в°С 0 - 5 - 10 - 15
Difference in liters
E1, EZ, E5 2, 0 1, 5 1, 0 0, 6
VZ, B5, B6, BP mechanical transmission 2, 0 1, 5 1, 0 0, 6
VZ, B5, B6, BP automatic transmission 2, 5 2, 0 1, 5 1, 0
PN 2, 5 2, 0 1, 5 1, 0


  1. To close a cover on a broad tank and after a trial trip to double-check frost resistance.

On the homepage