Mazda 323
- Introduction
About this Management
Mazda-323 brand cars — the introduction
Identification numbers of the car
Acquisition of spare parts
Technology of service, tools and equipment of a workplace
Start of the engine from an auxiliary source
Poddomkrachivaniye and towage
Automobile chemicals, oils and lubricants
Diagnostics of malfunctions
Routine maintenance
- Works on maintenance
Oil replacement
Replacement of an oil filter
Replacement of a perepuskny oil filter
Visual check on oil leak
Check of level of engine oil
Check of level of cooling liquid
Replacement of cooling liquid
Visual check of tightness of the cooling system
Frost resistance check
Adjustment of gaps of valves
Pulling up of bolts of a head of cylinders
Pulling up of bolts of inlet and final collectors
Check of the sensor of provision of a butterfly valve
Check of the moment of ignition
Replacement of candles ignition/check of electric contacts
Replacement of an element of the air filter
Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
Check of a maple belt / tension / replacement of a gear belt
Visual check of system of production of the fulfilled gases
+ Box transfers/drive of wheels
+ Brakes/tires/wheels
+ Steering management / drive of forward wheels
+ Car electric equipment
+ Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits
|
Replacement of an oil filter
|
|
|
|
- To unscrew an oil filter. The oil filter is, looking in the direction of the movement, behind on the block of cylinders. For unscrewing of the filter there is a special tool, for example, of HAZET 2172. It is also possible to hammer sideways into the filter the sharp screw-driver. Oil will follow at the same time — to substitute capacity.
|
- To clear a flange of an oil filter on the block of cylinders fuel. To remove laying of the filter.
- To slightly cover rubber laying on the filter with engine oil.
|
|
|
|
-
Petrol engine: To screw the new filter a hand. When laying of the filter adjoins to the block of cylinders, to tighten the filter on 1/2 turns. To follow instructions on the filter.
|
|
The filters only intended for this model can be used. |
|
|
|
|
-
Diesel engine: To screw the filter a hand until laying adjoins to an oil cooler. Then to tighten the filter a coupling tape on 7/8 turns. To follow instructions on the filter.
|
|
The filters only intended for this model can be used. |
|
|
|
|
